Eco-Friendly Hardware

  1. Home
  2. Eco-Friendly Hardware
  3. Floated Oil Recovery Unit - Oil Skimmer

Floated Oil Recovery Unit

Oil Skimmer

Various applications improve working efficiency!
Floated oil recovery unit「Oil skimmer」

● Floated oil recovery for various types of washers and washing tanks
● Floated oil recovery for various types of coolant devices
● Floated oil recovery for in-plant drainage tanks and drainage treatment devices
● Floated oil recovery meter inside of the drainage tanks for oil stations, etc.
RB・TB ★RB・TB

Features
■ For coolants(Model RB-200)
A palm-sized model. Suitable for downsizing of machine tools.

○ Highly-efficient floated oil recovery is achieved by the oleophilic and water-shedding special flat belt.
○ The recovery amount is constant as long as the belt touches the liquid level, i.e., the specially designed for liquid level change.
○ For the coolant tank use only. Not suitable for high-temperature liquid.
RB-200 ★RB-200

■ For washers (Model TB-75)

○ Space ィCsaving and easy-installation with two bolts
○ Simple mechanism for easy maintenance
○ Highly-efficient floated oil recovery is achieved by the oleophilic and water-shedding special flat belt.
○ The recovery amount is constant as long as the belt touches the liquid level, i.e., the specially designed for liquid level change.
○ High use effect in the washer is achieved by the chemical-resistant and thermally-resistant special flat belt.
TB-75 ★TB-75

Others

■ For outdoor drainage tanks and grit chambers (Models TB-150 to TB-300)
・ Prevention of oil spill by rainwater. Uses the same special flat belt as the one for Model TB-75.
・ Up to 5.4 m deep can be set.
・ The control panel can be installed on request.

■ For large washers (Model TW-150)
・ Uses the same special flat belt as the one for Model TB-75. Thus, highly-efficient floated oil recovery is achieved.
・ An optional setting SUS mesh belt type is available for (exceeding 100 degrees) high-temperature resistance, (strong) alkaline resistance and acid resistance.

Large size skimmer ★Large size skimmer

Dimensions

*Click the illustration to enlarge.


Model TB-75 Model TB-75 (Main body)
Model RB-200 Model RB-200 (Main body)

Structure and Description
Floated oil in the machining tank and washing tank is recovered by the specially-developed belt. The oil skimmer contributes to machining accuracy improvement, machining fluid corruption and deterioration prevention, and washing accuracy improvement.
The floated oil is absorbed on the belt while the belt goes into the fluid. As shown to the right, Model TB-75 (for washers) has a special belt suitable for quick and efficient recovery of dirty washing fluid and floated oil. Also, Model RB-200 (for coolants) has a special belt suitable for efficient recovery of floated oil such as lubricant.

Variations

 ▼For coolants (RB Series)

Motor capacity 3-phase, 200 V, 15 W
Motor rotation speed 27/31r.p.m
Belt width 20mm
Recovery capability Approx. 12 l/h (For mineral oil)
Installation depth (L) 115mm,165mm,250mm,350mm,400mm
 *Contact us about different voltage, CCC and CE certificates. Belt types other than listed above are available.

 ▼For washers (Model TB-75)
Motor capacity 3-phase, 200 V, 15 W
Motor rotation speed 27/31r.p.m
Belt width 75mm
Recovery capability Approx. 45 l/h (For mineral oil)
Installation depth (L) 300 to 1,000 mm (100 mm pitch)
 *Contact us about different voltage, CCC and CE certificates. Belt types other than listed above are available.

 ▼For outdoor drainage tanks and grit chambers (Models TB-150 to TB-300)
Motor capacity 3-phase, 200 V, 15 W
Motor rotation speed 27/31r.p.m
Belt width 150mm,200mm,250mm,300mm
Recovery capability Depending on the status of installation.
Installation depth (L) 300mm~5,400mm(100mm pitch)
 *Contact us about different voltage, CCC and CE certificates.

 ▼For large washers (Model TW-150)
Motor capacity 3-phase, 200 V, 25 W
Motor rotation speed 27/31r.p.m
Belt width 150mm
Recovery capability Depending on the status of installation.
Installation depth (L) 300mm~1,000mm(100mm pitch)
 *Contact us about different voltage, CCC and CE certificates.An SUS mesh type belt is available.


An option
This option is to separate recovered floated oil from recovered washing fluid (or coolant), and recovery them using difference in specific gravity.

Fill the tank half-full with the washing fluid (or coolant) before use.
Recovered oil and fluid came out from the recovery slot of the oil skimmer go into the tank (1). At this time, oil is separated from fluid by difference in specific gravity and, is ejected from the elbow for oil recovery.
Separated fluid passes under the partition plate, and goes into the tank (2). Fluid is returned to the tank in the oil skimmer through the socket and pipe section on the tank (2).

*Click the illustration to enlarge.
Oil skimmer/An option

For Model TB-75 For Model TB-75
For Model RB-200 For Model RB-200

Contact by e-mail

For eco-friendly hardware
[Ecology and Energy System Division] Tel: 0567-22-0191
For fine mesh and fine lath products
[Operation Division] Tel: 0567-22-0190